hi everyone i have a h machine thats showing high and low flow error, my temp is 33.0 and my cond. is 17.0.
any idea thank you

I would check the balance chamber membranes.

Could be a couple of things. First check your flow, degas and loading pressures. Check your CFS numbers ( debug screen 10), the switch may not be working. One of your balance chamber valves may not be working correctly. Watch debug screen 20 and see if cycle 1 or 2 on the balance chamber valves is when you get your flow messages. You may also have a torn BC diaphragm. Run a BC volume test. Those are the areas I check.

definitely check your balancing chamber diaphrams, temp not rising above 33 and cond. at 17, fresh and spent sides are probably exchanging..

was the machine on the floor. or in the bio room? make sure the machine was not on bypass for a long time.

Balancing chambers are not switching. If this happens heater is turned off but acid and bicarb pumps continue. BTW, what colour is your Honda?