Moderators: Dennis Todaro
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
<Tech101>
Posted
I have several 3Kos machines we unfortunatly bought that I cannot make the volume go up. All 4 machines have low volume alarms that will not turn louder when maxed out. They all alarm, but compared to the newer K machines the alarm is faint and wont get louder...any suggestions?
 
Reply With QuoteEdit or Delete MessageReport This Post
<Lumpy>
Posted
We have had this problem in the past. Each time I replaced the alarm speaker. Afterwards, the staff started complaining that the alarms were too loud.
 
Reply With QuoteEdit or Delete MessageReport This Post
<Guest>
Posted
I had this happen last week on a 3Kos machine. I repalced the 100 ohm potienometer. Now I can adjust the volume as needed.
 
Reply With QuoteEdit or Delete MessageReport This Post
<old F Guy>
Posted
Have repaced 10 or so speakers in 3kos machines in the last year. Must of been a bad run of speakers.
 
Reply With QuoteEdit or Delete MessageReport This Post
<biio>
Posted
Same here 3kos, most of mine had to replace the speaker
 
Reply With QuoteEdit or Delete MessageReport This Post
<unnamed>
Posted
have seen nurses and techs with oversoaked bleach rags cause this
 
Reply With QuoteEdit or Delete MessageReport This Post
<Tech101>
Posted
Thanks everyone!!! I replaced the speakers and as earlier suggested the nurses say they are now too loud! I Appreaciate the input.
 
Reply With QuoteEdit or Delete MessageReport This Post
<tec101>
Posted
thanks it was speakers
 
Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community  
 


Copyright RenalWEB 2009